Skimboard

What is Skimboard

Buying Your First Board

Before you start, firstly you need to get yourself a board. A skimboard is half the length, half the thickness, slightly wider and has no fins at the bottom compared to a surfboard. There are two types of boards available in the market, wood boards and foam boards. As a beginner I would recommend you start out with a wood board because it is cheap, stable and it can withstand any trashing you could throw at it as a beginner.

41" Woodie board square tailWood boards are best for sand skimming because it can last longer on the sand without wearing off the bottom of your board compared to a fiberglass board. On top of that, you need not worry about the size of the board, rocker height, thickness of the board or even the board not being able to withstand your weight and carry you out to sea. Basically, any wood board that is proportionate to your size and ability will do. On the other hand, if you are into catching waves, I would suggest you use a foam board because a wood board is very hard to ride on water. Because it is made of wood and because the board is much heavier compared to a fiberglass board, you will sink before you even reach the waves. Not to say you could not totally ride a wood board on water but it will take a longer time to practice and just harder to learn.

Fiberglass Board Pin Tail

Now if you are taking my advise on the foam boards, you need to take a few things into consideration. Before I start explaining, foam boards are made of either high quality fiberglass or carbon. And the foam serves as the core of the board, which makes it light and buoyant.Therefore, if you are getting a foam board you need to know:

1). Board Size

All foam boards come in different sizes depending on the manufacturer’s specifications. So make sure you know what board size is suitable for your weight before purchasing it. For example, if you are purchasing a Victoria skimboard and you weigh about 70kg (approx. 154lb) you should get either a medium large board or a large board. Between the two you have to take into consideration your own ability and preference. Both boards are able to withstand your weight and take you out to sea but with a smaller board (ML) you have more control over it (front and back) compared to the large board. And for a smaller and slimmer board, you are able to maneuver better compared to a bigger board. But a larger board can take you out further into the ocean compared to the smaller board but maneuverability wise it is not as good compared to a slimmer board. So in order to make the right choice make sure you know what you can do (athletic ability) and what you want to do before purchasing a board or you can always ask your local dealers for advice. If all else fails, you can always email me. I’m always here to help.

2). Thickness

Another thing you should know before purchasing a board is the thickness of the board. Most board manufacturers have standardized the thickness of their boards to the size of the board. Bear in mind that these board manufacturers are professionals and they know what is best for you. Time proven thickness are 5/8” and 3/4". Generally, the thicker the board the further it will take you into the ocean but remember the added thickness contributes to added weight on the board. Besides, a thicker board is also much harder to maneuver compared to a thinner board on water.

3). Rocker

Rocker is the tilted (curved) end of the board. This is the nose (front) of the board. The purpose of rocker is to help you make the transition from sand to water as smoothly and easily as possible. Without a rocker, the nose of your board will dive into water when making the transition. It depends on the flatness of your beach. If the beach is flat, a lower rocker is good enough to make the transition from sand to water. But if the beach is steep, a higher rocker is needed for the transition. Usually rockers are 2” to 3” high. But bear in mind, a higher rocker will slow the board down compared to a lower rocker board.

4). Board Weight

For maximum skim runs, basically get the lightest board you could find. Although, if you are from a windy area, you need a heavier board so that your board can withstand the wind thus making sure that your board does not fly off when you throw it down.

5). Tail Shape

Skimboards have three common tail shapes, which are pintail, swallow tail (W shaped) and square tail. The most commonly used tail is the pintail because it is very stable on water. Swallow tail and square tail boards on the other hand gives more maneuverability to the board but by having these tails, it shortens the board which gives it a twitchy feel. One of the benefits of having these tails is that it throws a bigger spray. My advice is to stick to the pintail boards. In short, know your abilities; get a board that could withstand your body weight and carry you out to sea yet just the right size and rocker height for you to be able to maneuver the board easily. Also the lighter the board, the more runs you could make.

Events

Skimboarding Events

Penang 3rd International Skim Competition 2009

Alrite guys the event we been waiting for is confirmed. Get ready to partayyyyyyy this July Penang style.

Date: Saturday, 11th July 2009
Venue: Batu Feringghi Beach (Bayu Senja Complex)
Time: 9AM - 5PM

Remarks:
- Max. heat 12
- Max. contestants 48
- 1 category 6 prizes (1st, 2nd, 3rd placing, Best Trick, Best Intermediate Rider & Best Junior Rider)
- 2 judges + 1 head judge
- Knockout rules (we want to wrap up the comp as early as possible. No point dragging it throughout the day... too tiring)
- BBQ party
- Apartment stay (Bayu Emas apartments)

Foam Board

POO Skimboard constructed from Polyurethane Foam and Aircraft Grade Epoxy Resin, P.O.O. foam boards are perfect for going far across deep water and stronger for aerial performances. Our board nose, tail and rails are double reinforced for maximum strength.

Blue
Color Bottom: Light Green
Size: 50" x 20" x 0.75"
Skimmer Weight: 45kg - 60kg
Price: RM820.00